Description
EPM-6100 Coloured Epoxy Mortar
EPM-6100 Epoxy Mortar is a specially coloured formulated, 3-component, epoxy resin system, which can be applied at a thickness between 3 – 50mm.
EPM-6100 is designed to provide a material of very rapid strength gain and excellent adhesion that is capable of withstanding chemical, impact and abrasive attack. It is ideal for sub screed and providing falls to drains, concrete repairs, joint edge repairs and general patch repair.
FEATURES & BENEFITS
– Eco-Friendly: Made from natural, renewable, plant-based materials.
– Amine Free & Nonylphenol Free: Ensures a safer application and environmental footprint.
– Non-Toxic and Non-Corrosive: Safe for both users and the environment.
– 100% Solid: Provides a robust and durable surface.
– Easy Application: Designed for straightforward installation.
– Protects Concrete: Guards against oil and chemical spillages.
– Three-Pack System: Pre-portioned for accurate and easy mixing.
– Fast Setting: Sets in just 3 to 4 hours at 20??C, minimising downtime.
– Customisable Colours: Can be colour-matched to suit specific project needs.
PACKAGING KITS
– 25kg Kit: Contains Component A + B + C
COVERAGE
– 2kg per 1mm Thickness
*Note: Coverage figures are theoretical. Practical coverage rates may vary due to wastage factors, site conditions, profile, and porosity of the substrate.
MIXING INSTRUCTIONS
1. Pour Part B (Hardener) into Part A (Resin).
2. Stir and blend thoroughly for a minimum of 3 minutes using a low-speed paddle mixer (300-400 rpm).
3. Transfer the mixed resin into a forced action mixer and thoroughly mix with Part C (Aggregate).
APPLICATION METHOD
1. Apply EPR-100 (Epoxy Primer) to the prepared surface.
2. Immediately apply the mixed EPM-6000 to the wet primer. Compact firmly into place to avoid trapped air.
3. Use a steel trowel to achieve a smooth finish, wiping the trowel at intervals with Sindec Cleaning Solution.
4. Depending on site conditions, apply ERP100 or DPM-230/OT-235/EP-TACK/EPR-GC to the prepared surface. While wet, scatter with kiln dried quartz sand (0.4-0.8mm) and allow to dry. The next day, remove excess aggregate and apply EPM-6100.
Minimum application temperature: 5??C.
EPM-6100 is your go-to solution for a seamless, durable, and eco-friendly industrial floor. Its easy application, fast setting time, and customisable colour options make it ideal for a wide range of industrial and commercial environments.
Safety: It’s important to use resin in a well-ventilated area and wear appropriate safety gear, such as gloves and eye protection, due to its fumes and potential skin irritants. Proper safety measures are essential when working with resin.
Reviews
There are no reviews yet.