Description
SL-3200 Flexible Self Smoothing
SL-3200 is a 3-component, Flexible epoxy self-smoothing, with a thickness range of 2-6mm flooring system designed to create a seamless and smooth surface flooring solution for areas that require decorative, durability and visual appealing
finish.
Sindec SL-3200 is a commonly used in commercial, industrial and residential settings for its durability to foot and vehicle traffic in medium to heavy duty areas. Available in a range of colours.
FEATURES & BENEFITS
– Nonylphenol Free: Environmentally friendly and safe for use.
– 100% Solid: Ensures maximum coverage and durability.
– Easy Application: Simplifies the installation process, saving time and effort.
– Hard Wearing: Provides exceptional resistance to wear and tear.
– Smooth Gloss Finish: Delivers a sleek and professional appearance.
– Low Maintenance: Requires minimal upkeep, making it cost-effective.
– Seamless and Hygienic: Creates a continuous surface that’s easy to clean and maintain.
– Easy to Clean Finish: Allows for effortless maintenance and upkeep.
– Good Abrasion Resistance: Stands up to heavy traffic and mechanical impact.
– Chemical and Mechanical Resistant: Protects against harsh chemicals and mechanical stresses.
– Flexible: Adapts to substrate movements without cracking.
PACKAGING KITS
– 25kg Kit: Contains Component A & B
COVERAGE
Coverage varies widely due to the porosity and profile of different substrates.
– 25kg: Covers approximately 4.63m² at 3mm thickness.
*Note: Coverage figures are theoretical and may vary due to site conditions and substrate characteristics.
MIXING INSTRUCTIONS
1. Pour Component B (hardener) into Component A (resin).
2. Mix for a minimum of 3 minutes using a low-speed paddle mixer (300-400rpm).
3. Use a spatula to scrape the sides and bottom of the bucket.
4. Pour the mixed resin into a clean bucket and mix for an additional minute.
5. Transfer the mixed resin into a forced action mixer and thoroughly mix with Part C.
PRODUCT APPLICATION
1. Apply a minimum of two coats of Sindec Primer (EPR-100, DMP-230, or OT-235 depending on site conditions) at 300g/m² per coat to prevent pin-holing.
2. Use a steel trowel or pin rake to apply the product to the required thickness.
3. Over-roll the laid area with a spiked roller to release trapped air.
4. Apply when ambient temperature is between 10°C and 25°C. Minimum application temperature is 7°C.
5. Clean tools with Sindec Tool Cleaner before the resin has cured.
SL-3200 is our advanced coating solution for a reliable, durable, and visually appealing finish that stands the test of time.
Safety: It’s important to use resin in a well-ventilated area and wear appropriate safety gear, such as gloves and eye protection, due to its fumes and potential skin irritants. Proper safety measures are essential when working with resin.
Reviews
There are no reviews yet.