Indoor or outdoor! Get a thicker coat of the micro cement look with Resina One by Atriafloor; a single component, water based cementitious resin, based on True Cement™ technology. More weather resistant than Titanium
Thick applied, with a monolithic cementitious finish, trowelled, marbled in appearance and easy to apply and high mechanical resistance over time, ideal for decoration on any classic or modern environment.
Suitable for walls and floors; counters benefit from enhanced durability and fantastic aesthetics, can be layered and stencilled to generate the most amazing looks.
Dilution
Water max 2% if necessary
Theoretical Yield
1 Kg / m2 in 2 coats
(500 Gr / m2 per coat)
Application
Trowel
Pack Sizes
5kg - 20kg
ATRIAFLOOR
PRIMER / CONSOLIDANTE
ATRIAFLOOR
RASANTE ONE
ATRIAFLOOR
RESINA ONE
ATRIAFLOOR PROTETTIVO
GLOOS or MATT
ATRIAFLOOR
WAX
FLOOR PREPARATION
Min. 25N|mm2 Compression Strength - Dust Free - Must be Level - Crack Free
Before applying the Resina One resin, you should adequately prepare the substrate to be treated by applying Atriafloor Primer (on tiles or ceramic) or Atriafloor Consolidante consolidating product (on cement and marble) applying the recommended amount (120 g/m²), with a short-bristle roller. After drying, apply two coats of Atriafloor Rasante One top coat, depending on the degree of substrate unevenness, using the recommended quantity (1 kg/m² per coat).
After preparing the substrate, apply the first coat of Resina One (about 500 g/m²) using a steel trowel. After drying (2 or 3 hours, depending on temperature), apply the second coat of the product (500 g/m²) smoothing the substrate with short trowel passes (right/left) to make it look even.
NOTE: To get a more contrasted final effect, it is advisable to spread the second coat more. In addition, to further accentuate the True Cement effect, for the first coat of Resina One you can use a darker shade than that of the final coat you have chosen, as in the examples shown below
1st coat TRUE021
2nd coat TRUE020
1st coat TRUE003
2nd coat TRUE020
1st coat TRUE021
2nd coat TRUE027
1st coat TRUE012
2nd coat TRUE032
TRUE CEMENT ™ BY ATRIA SELECTION ON REQUEST RAL® AND NCS®
WITH RESTRICTIONS ON PASTEL AND MINERAL COLOURS
FINISH: GLOSS OR MATT
TROWEL APPLICATION
IDEAL FOR ANY HORIZONTAL OR VERTICAL SURFACE
AVAILABLE PACKAGE KITS: 5Kg & 20KG
The colours represented in this chart are to be considered indicative and do not constitute absolute reference.
DO YOU HAVE AN ENQUIRY?
Feel free to contact us via this form for any products or projects you might have questions for. We are here to help!