Description
DPM-230 Fast Cure DPM Epoxy Primer
DPM-230 Fast Cureย is formulated to cure more rapidly than the traditional DPM primer. The coating is designed for applications where a shorter downtime or a quicker return to service is required. It offers the same benefits as the standard Epoxy Primer DPM-230, but with the advantage of a faster curing time.
DPM-230 Fast Cureย is a fast curing, two-component epoxy primer where damp-proofing is essential for use on concrete and polymer modified cementitious screeds to enhance adhesion. DPM-230 Fast Cureย Primer is designed to reduce the journey of water vapour through the concrete. It allows moisture sensitive systems to be applied to concrete and screed with a high R.H. of up to 98%.
FEATURES & BENEFITS
– Nonylphenol Free: Environmentally friendly and safe for use.
– 100% Solid: Provides maximum durability and performance.
– Versatile Application: Suitable for dry or damp conditions, old or new concrete.
– Enhanced Adhesion: Improves the bond of toppings to the substrate.
– Water Permeability Reduction: Effective as a damp-proof membrane.
– Reduced Overcoat Time: Speeds up project completion.
– Fast Curing: Quick drying time with excellent film quality.
– Rapid Cure & Long Pot Life: Combines quick curing with extended working time.
– Moisture Tolerant: Reliable performance during curing, even in moist conditions.
– Early Water Resistance: Provides excellent resistance to water shortly after application.
– Chemical Resistance: Offers very good resistance to chemicals.
– Flexibility: Adapts well to substrate movements.
– Superior Corrosion Resistance: Protects surfaces against corrosion.
– Eco-Friendly: Made from natural, renewable, non-food chain raw material feedstock.
PACKAGING KITS
– 5kg Kit: Contains Component A & B
– 10kg Kit: Contains Component A & B
– 15kg Kit: Contains Component A & B
COVERAGE
Coverage varies based on substrate porosity and profile.
– 5kg: Covers 7 to 10 mยฒ
– 10kg: Covers 18.75 to 25 mยฒ
– 15kg: Covers 35 to 50 mยฒ
*Note: Coverage rates are theoretical and may vary based on actual site conditions and substrate characteristics.
RECOMMENDED APPLICATION
– Apply two coats to act as a damp-proof membrane.
– Pigment each coat differently to identify the two priming layers if required.
– Apply coats at right angles to each other for optimal coverage.
MIXING INSTRUCTIONS
1. Pour Component B (hardener) into Component A (resin).
2. Mix for at least 3 minutes using a low-speed paddle mixer (300-400rpm).
3. Scrape the bucket sides and bottom with a spatula.
4. Transfer the mixture to a clean bucket and mix for an additional minute.
APPLICATION METHOD
1. Apply the mixed primer immediately in a thin, continuous film.
2. Work the primer into the surface using a squeegee, then roll to avoid pooling.
3. On porous surfaces, ensure complete surface sealing by using sufficient primer.
4. Apply two coats of DPM-230 Fast Cure to ensure a fully sealed surface.
DPM-230 Fast Cureย is your comprehensive solution for enhancing adhesion, providing superior protection against moisture and chemicals, and ensuring long-lasting performance for all your concrete flooring needs.
Safety: It’s important to use resin in a well-ventilated area and wear appropriate safety gear, such as gloves and eye protection, due to its fumes and potential skin irritants. Proper safety measures are essential when working with resin.
Reviews
There are no reviews yet.