AQ-130 Waterbase Epoxy Primer

AQ-130 is a two-component, water-based epoxy primer that penetrates well on concrete, polymer-modified screeds, and timber. It improves adhesion for all floors and, when used with water-based coatings, provides a vapour-permeable system.

Description

AQ-130 Water-Based Epoxy Primer

AQ-130 is a two-component water-based Epoxy Primer with good penetrating properties for use on concrete and polymer modified cementitious screeds, timber etc. AQ-130 is designed to improve the adhesion of all floors. When used with water-base coatings provides a vapour permeable system topping and coating system to the substrate.

FEATURES & BENEFITS
Nonylphenol Free: Environmentally friendly and safe.
100% Solid: Ensures maximum durability and performance.
Easy Application: User-friendly mixing and application process.
Gloss Finish: Provides an easy-to-clean, attractive surface.
Slip-Resistant Options: Available for enhanced safety.
Chemical Protection: Guards concrete against oil and chemical spills.
Low Viscosity: Excellent penetration into substrates.
Pore Sealing: Reduces outgassing and pin-holing in resin finishes.
Adhesion Improvement: Strengthens the bond between the substrate and floor toppings.

PACKAGING KITS
2.5kg Kit: Contains Component A & B
5kg Kit: Contains Component A & B
10kg Kit: Contains Component A & B

COVERAGE
Coverage varies based on the substrate’s porosity and profile.
2.5kg: Covers 10 to 15 mยฒ
5kg: Covers 20 to 25 mยฒ
10kg: Covers 30 to 50 mยฒ
*Note: Coverage rates are theoretical and may differ due to actual site conditions and substrate characteristics.

MIXING INSTRUCTIONS
1. Pour Component B (hardener) into Component A (resin).
2. Mix for at least 3 minutes using a low-speed paddle mixer (300-400rpm).
3. Scrape the bucket sides and bottom with a spatula.
4. Transfer the mixture to a clean bucket and mix for an additional minute.

APPLICATION METHOD
1. Apply the mixed primer immediately in a thin, continuous film.
2. For priming, use 200-250g/mยฒ
3. Work the primer into the surface with a roller or squeegee, ensuring no pooling.
4. On porous surfaces, ensure complete surface sealing by applying an adequate amount of primer.

Enhance your flooring’s durability and appearance with AQ-130, the reliable choice for superior adhesion and protection.

 

Reviews

There are no reviews yet.

Be the first to review “AQ-130 Waterbase Epoxy Primer”

Your email address will not be published. Required fields are marked *