Kit Sizes Available
1.5kg - 3kg - 7.5kg - 15kg+
PRODUCT DESCRIPTION
SINDEC Diamond Cast HV High Viscosity Epoxy Resin is a two component, virtually solvent free and 100% solid epoxy resin for use on countertops with a thick application of
2-3mm.
Consumption of 2kg of material per M2 and touch dry in 3 hours at 20C will make this coating ideal for countertop or table coating use.
The thickness or high viscosity in its material form allow for consistent and accurate design, meaning that unlike other epoxies this one retains your design every time and wont run off like other conventional resins.
You can also achieve sharp edges on your counter without the use of tape damming, minimising your waste when working. A diamond gloss/sheen finish guaranteed
PRODUCT FEATURES
-
High Viscosity RETAINS your desired design and provides sharp edges
-
Ideal for Countertops, Artwork and Projects alike
-
100% Solid Clear Epoxy
-
Fast Drying Diamond Gloss Finish
-
A high virtually solvent free high viscosity resin perfect for countertop design, great for art projects.
-
With the high level of viscosity it is useful on edge work with less chance of slumping.
-
The resin is clear and has a diamond gloss, fast drying finish.
-
For use on countertops in laminate or stone.
APPLICATION & MIXING
Do not apply outside of the range 15°C to 25°C.
Localised heating or cooling equipment may be required outside this range to achieve ideal temperature conditions.
To reduce the risk of “blooming” caused by condensation, the climate above the uncured surface should be maintained at least 3°C above the dew point for at least 48 hours after application.
​
Material should be stored at 15C to 30C for a minimum of 8 hours before mixing.
Pour into a clean container add 2 parts component A and 1 part component B. Mix together with a slow speed electric drill 300 – 400 RPM using a helix mixer (do not mix by hand).
Mix for a minimum of 3 minutes until the mix is homogeneous.
Pour onto a NEW clean bucket to avoid unmixed residue and mix for another 1 minute. Ensure all the material is mixed by turning in the sides with a spatula.
Use immediately, as cure is by chemical reaction and is faster than normal epoxy resins.
UNLIMITED COLOURS
Our Epoxy Resins are fully compatible with our Metallic Powder Pigments and Liquid Epoxy Pigment Dispersions. Mix colours to achieve an infinite array of colours for your Projects
NEXT DAY DELIVERY
Quick & Secure Delivery in the UK with next working day delivery
