top of page

ADDITIVES & SOLVENTS

Sindec_logo_website.jpg

Clean, Prepare and Modify your resin product to fit your project requirements.

Buy with confidence, use SINDEC Pro Quality Products.

UV STABILIZER

  • UV Stabilizer is a solid very red-shifted benzotriazole-based UV absorber for resin coatings to protect against yellowing.

  • It was especially designed for solvent-based clear or semi-transparent coatings over carbon-fibre-reinforced plastics (CFRP) or glass-fibre-reinforced-plastics (GFRP) where fibres are embedded in an epoxy matrix.

  • Protects Resin against UV Yellowing.

  • Can be mixed with epoxy and other resins to shield against UV discolouration.

mdd 2160.JPG
mdd 2160.JPG

XYLENE

  • Xylene is 100% compatible with SINDEC products. Suitable with Epoxy Resins for dilution.

mdd 2160.JPG

ISOPROPYL ALCOHOL IPA

  • Isopropyl Alcohol IPA is a highly effective, general use cleaning solvent that is used to clean a variety of substrates and remove a variety of soils.

  • This 99% pure IPA is available in a variety of sizes for all types of use. 

mdd 2160.JPG

ACETONE

  • Acetone is the standard of the industry for cleaning tools and brushes while working epoxy resins.

  • It is also the recommended solvent for removing greases and waxes from surfaces which are to be bonded, repaired or primed.

  • Acetone will not remove resin from tools, brushes, etc.

  • After the resin has set, It is not recommended for thinning resins or gel coats as this can lead to added pinholes and premature yellowing.

  • Although acetone may be used as a thinner for resins we would recommend the use of xylene for this purpose.

  • Acetone is a highly flammable liquid and must be handle with the same care given to other flammable liquids.

mdd 2160.JPG

TA THICKENING

AGENT

  • TA Thickening Agent is an additive which thickens viscosity on most resins with a use of 1-3% of the total resin quantity used.

mdd 2160.JPG

FINE ANTI-SLIP

ADDITIVE

  • FINE Anti-Slip Additive is an additive for top or finishing products for an Anti-Slip finish.

  • Suitable for flooring and waterproofing application.

mdd 2160.JPG

EPOXY

ACELERATOR

  • Epoxy Accelerator acts a catalyst additive for epoxy systems, improving the curing speed and allowing the resuming of work in a short time.

  • Allows curing acceleration of epoxy systems at low temperatures and in high humidity environments (ensure good ventilation high humidity indoor areas to facilitate evaporation).

mdd 2160.JPG

POLYURETHANE

ACCELERATOR

  • Polyurethane Accelerator is a solvent-free catalyst to help faster drying in low temperature environments

  •  ONLY SUITABLE FOR Polyurethane Resins Bi-Component.

mdd 2160.JPG

GLASS BEADS

ANTI-SLIP

  • Glass Beads Anti-Slip are Solid Glass Spheres used for their anti-slip qualities in bathrooms and wet rooms where a less aggressive product is required due to the traffic mainly being bare feet.

mdd 2160.JPG

SINDEC WAX

  • Sindec WAX is a protective floor wax designed to protect against initial scratch and abrasion, whilst resin fully cures/hardens.

  • Prevents adhesion of dust or foreign particles into the resin.

  • Facilitates early use of the floor, a few hours after resin application.

  • Used as a maintenance product for resin floors, protects against scratches and abrasion, maintains gloss/sheen.

Anchor 1

HAVE YOU GOT AN ENQUIRY?

Feel free to contact us via this form for any products or projects you might have questions in regards to. We are here to help!

GET IN TOUCH...
arrow&v

Thanks for submitting!

bottom of page